Anti-Graffiti Paint System (1 Gallon) (#301 Azalea)

Amazon.com Price: $0.00 (as of 27/10/2020 19:57 PST- Details)

Exceptional Bonding Capabilities – No primers needed; direct to most surfaces including ferrous and non-ferrous metals without destructive surface preparation
Low to Zero VOCs – The volatile organic compounds (VOCs) are less than 15 grams / liter
Permeability (2.43 Perms) – Water barrier not vapor barrier; allows water vapors to migrate through the coating into the atmosphere

Clear

Description

INSTRUCTIONS

Surface Preparation:
-Remove all loose rust, dirt, grease, peeling paint and other contaminates per SSPC-SP1, SSPC-SP2, SSPC-SP3 (low or high pressure wash with a biodegradable cleaner).
-For concrete and masonry surfaces PH will have to read 7-8.

HP-300 Anti-Graffiti System Product Application:

-Apply one coat of Clear or Color HP-105, HP-300 Satin or Matte 4.0 – 5.0 mils WFT.
-Apply second coat of Clear HP-105, HP-300 Satin or Matte 4.0 – 5.0 mils WFT.
-Note: A light sanding is advisable between first and second coats.

REMOVING GRAFFITI

Most Graffiti Areas:
-Wash with soapy water The usage of a clean rag or sponge.

Difficult to Remove Graffiti Areas:
-Spray TSW2 Multi-Master biodegradable remover on difficult to remove graffiti until area is saturated.
-Allow time for TSW2 remover to act (a couple of seconds to a couple of minutes, though on a regular basis less than a minute).
-Wipe with a clean rag or if necessary agitate with a stiff nylon brush until graffiti is in suspension.
-If remover does not lift all graffiti with first application reapply a second application of TSW2 product following spray saturation, act and clean steps immediately above.
-At all times rinse area where TSW2 used to be applied with clean water to remove any excess TSW2 remover.
-Safewipes are a great way to remove graffiti, grease, grime or stains off Top Secret’s urethane products. If neutral or heavy duty cleaners don’t seem to be removing the affected area, Safewipes will have to be used in accordance with the directions below.

DIRECTIONS:

-Before starting, put on the gloves.
-Step 1: Tear open Graffiti ‘Safewipes’ Pouch, unfold and scrunch up towel. The usage of a circular wiping motion remove graffiti in small areas at a time, turning the towel over as you go. A soft bristle brush can be utilized for more aggressive stains or graffiti.
-Step 2: For best results, tear open Graffiti ‘Afterwipes’ Pouch, or use a damp towel, and wipe over.
Exceptional Bonding Capabilities – No primers needed; direct to most surfaces including ferrous and non-ferrous metals without destructive surface preparation
Low to Zero VOCs – The volatile organic compounds (VOCs) are less than 15 grams / liter
Permeability (2.43 Perms) – Water barrier not vapor barrier; allows water vapors to migrate through the coating into the atmosphere
Ultraviolet Insensitivity – Excellent UV protection in color or clear; no clear coats needed for better protection
Types of Surfaces – Concrete, stained concrete, carbon steel, aluminum, galvanized metal, stainless steel, fiberglass, wood, clay/masonry surfaces, stone, hardwood, terrazzo, vinyl composition tile (VCT), vinyl sheeting, ceramic and other tile and grout surfaces with the addition of Adhesion Bond

Additional information

Color

, , , ,

Brand

Label

Manufacturer

Model

MPN

PartNumber

ProductGroup

Publisher

Size

Studio

Reviews

There are no reviews yet.

Be the first to review “Anti-Graffiti Paint System (1 Gallon) (#301 Azalea)”

Your email address will not be published. Required fields are marked *